Wer sind wir » There is now a delightful range of crown

An aluminum alloy has now been created to especially suit these beautiful art metal ceilings. Aluminum is a corrosion resistant Renell Wren Youth Jersey , durable product which doesn't rust, unlike steel which is used by some manufactures of pressed tin. The panels are still widely known as pressed tin even though they are not made from tin.


Think About The Design In Your Ceiling Panels And whether They Will Suit The Measurements Of your Room


With a little forethought you can create a "tin" ceiling that exudes the "Wow Factor". The "Wow Factor" is the reaction you will receive when your visitors look at your new ceiling for the first time. To get that factor you need to spend a little time thinking about how the ceiling panels will fit your particular room. If the repeat pattern you have chosen measures two feet by two feet, will you need to trim all the outside panels in order for them to fit the dimensions of your room? If this would be the case then you need to re-think your plans.


You have two choices: choose a small all-over style which will look perfectly fine if trimmed to fit the room or you can use a border panel around the outside of your room and have the larger designs in the centre of the ceiling. Most of the larger designs require a border or filler strip around the edge Ryan Finley Youth Jersey , otherwise they don't look so elegant when installed. Border or filler panels most usually have a small pattern on them which complements the larger main panels in the centre of the ceiling. If you require a border around your main panels then it will be worth consulting an expert to find out how wide the border should be. It is easy to upset the balance of your ceiling by having a border that is too wide or conversely too narrow. Ask your supplier for help on this topic.


Is Crown Cornice Needed?


There is now a delightful range of crown cornice moldings made from aluminum. These come in a variety of sizes to suit various ceiling heights. Crown cornices need to be mitred in the corners of the room and there are now various accessories to suit the individual cornices. These accessories are very handy as they hide the mitred cut edges which can sometimes be a little rough for those home handymen who have little experience in mitring. An alternative to metal crown cornices are timber moldings. Plaster cornices should not be used with metal ceilings.


Can You Install Your Tin Ceilings Yourself?


The easiest way to install pressed tin is to firstly fix building ply to the old ceiling or walls and then nail the tin to the ply. Timber battens can be used but building ply makes the job much easier. It is best to remove existing cornice before the ply is fixed to the ceiling. Most reputable ceiling suppliers will offer detailed fitting instructions. If you lack experience in this area, you may prefer to employ someone with building experience. However, most metal ceilings are fitted by their owners. Tacking nails should be used initially until you are satisfied you have everything in its final position. Tacking nails are quite long and must only be partly nailed in so that they can be removed easily with pliers. When you are satisfied that everything is in the right spot then you can remove the tacking nails and finish the job off with small nails. Details of which nails to use should be in the manufacturers fitting instructions.